View source for WorkMan HVS - Cenium

From WorkManSoft Wiki

← WorkMan HVS - Cenium

You do not have permission to edit this page, for the following reason:

---

You can view and copy the source of this page.

== About == WorkMan HVS works with Cenium from WorkMan HVS v 2.1 and using the Comtrol protocol. == Setup in WorkMan HVS == * The protocol being used is COMTROL. == Setup in Cenium == * Make sure the Comtrol-communication is up and running. * Callcharge should be set to metered. == Cleaning codes == These are typically used (but can be different in your specific system!) 1. Vacant dirty room 2. Cleaning required 3. Vacant clean room 4. Occupied clean [[Category:WorkMan HVS]]

Return to WorkMan HVS - Cenium.