Difference between revisions of "WorkMan HVS - Configuration Help"
From WorkManSoft Wiki
Jump to navigationJump to search| Line 20: | Line 20: | ||
## EXTID, the extension in the PBX. Will use same as ROOMID if not mapped. Typically added when extension isn't the same as the ROOMID. | ## EXTID, the extension in the PBX. Will use same as ROOMID if not mapped. Typically added when extension isn't the same as the ROOMID. | ||
## ROOMNAME, used when you want to have a different name e.g. "Room 123". | ## ROOMNAME, used when you want to have a different name e.g. "Room 123". | ||
| − | ## IPOID, is the ID of the PBX. If ignored the ID of 1 will be used.<br> [[File:hvsconfig_import.png | + | ## IPOID, is the ID of the PBX. If ignored the ID of 1 will be used.<br> [[File:hvsconfig_import.png]] |
# After mapping is complete, press "Import data" and click Yes to import it. | # After mapping is complete, press "Import data" and click Yes to import it. | ||
# After import is complete, review the Result and see if errors have occured. | # After import is complete, review the Result and see if errors have occured. | ||
Revision as of 12:28, 8 January 2016
About
This page contains information on how to use WorkMan HVS Config. It's primarily focused to support the latest version of HVS.
Updated for version: 3.0.0.0
Pages
Configuration - Import from file
Steps to import new rooms.
- Click "Select file to import" on the Prepare Data page.
- Choose a file. Only textfiles are supported. Then click open.
- Depending upon the format you have you can choose how to import it. Then click OK
- All data is prepared in a grid below. Make sure it looks reasonable.
- In the grid below "Map to columns", choose what column should be mapped to which field. Please note that ROOMID must be used. The others are optional
- ROOMID, a new room with this value is added. If it already exists it will be ignored.
- HOTSOFTROOMID, used to map with the PMS. Will used ROOMID if not mapped. Only needed when PMS have some different name e.g. prefix or so.
- EXTID, the extension in the PBX. Will use same as ROOMID if not mapped. Typically added when extension isn't the same as the ROOMID.
- ROOMNAME, used when you want to have a different name e.g. "Room 123".
- IPOID, is the ID of the PBX. If ignored the ID of 1 will be used.
- After mapping is complete, press "Import data" and click Yes to import it.
- After import is complete, review the Result and see if errors have occured.
