WorkMan HVS - IP Protocol

About

This protocol is our own protocol and can be used if no other protocol is in place.

The protocol works over TCP/IP and is linebased with CR+LF (#13#10) as a end of command terminator. The second parameter is always a sequencenumber. WorkMan HVS can work both as a client and as a server.

List over commands

Welcome

Command	WELCOME
Direction	HVS to HS
Mandatory	No, only HVS in servermode sends this.
Structure	WELCOME;
Response	none
Example sender	WELCOME;1
Example response
About	Sends a welcome from the HVS server to connecting client.

Kepp-alive

Command	ALIVE
Direction	HVS to HS
Mandatory	No, only HVS in clientmode sends this.
Structure	ALIVE;<sequencenumber>;
Response	OK;ALIVE;<sequencenumber received>
Example sender	ALIVE;1
Example response	OK;ALIVE;1
About	Sends a welcome from the HVS server to connecting client.